Physics · the experiment
Tune the two-rotor bench
Two levitating magnet rods, one above the other: the first spins and makes its gravitational field vary, the second listens. Set the gap, the cold and the speed, and watch the measuring time computed by the authors melt away or blow up. Nothing has been built yet: every number is a calculation.
1 · The pulsing field
Beginner
The source rotor, a small rod, spins end over end at one million turns per second. At what frequency does its gravitational field oscillate?
Bring the detector closer to the source until you recover the set-up described in the article.
2 · Halving the gap
Intermediate
At 4.2 K, with 600 µm between two 300 µm rotors, the authors compute 15.9 days of measurement. If the gap is halved, roughly how long does it take?
The bench is now at 4.2 K. Bring the detector closer as in the question.
3 · Faster means smaller
Expert
At 10 mK, two 300 µm rotors spinning at 1 MHz need 55 minutes. To spin at 2 MHz without breaking, they must be half as long, with the gap still two lengths. How long does it take then?
Raise the frequency at the structural limit, with rotors shortened to match, up to the case in the question.
4 · Bounding a delay in gravity
Expert
At a 2 MHz signal, with a signal-to-noise ratio of 10, the phase would bound a delay in gravity to 8 × 10⁻⁹ s. Same rotors, same measuring time, but spinning half as fast: what bound?
Bench tuned
—